Zuarinagar, Goa
- GST NO. : 30AAAFZ0663J1ZC
Infrastructure
Our primary manufacturing Facility is located in central Goa and spread over an area of 2000 sq mt with built up covered area of 1500 sq mts.
Our infrastructural setup is one of the best and is highly advanced in terms of technology and efficiency. We have a well-equipped machine shop and fabrication shop. The machine shop is equipped with heavy machineries of reputed make like Kirloskar, HMT, Bharat Fritz and EOT cranes for handling heavy jobs. Machine shop have spacious layout with marked lanes. It is equipped with special measuring tools such as Micrometers Internal and External, Vernier Calipers upto 1 mtr, Outside Caliper upto 1 mtr, Dial Gauges, Bore Gauges, Surface Plates, Reamers, etc and other necessary Jigs and Fixtures.
Fabrication shop occupies a huge space of shop floor with a 10 T capacity overhead crane. It is equipped with a heavy plate bending machine, a 80 T hydraulic press, fly press, plasma cutting, CO2 welding machine, welding rectifiers, cutting sets, band saw, hand shear, heavy drill machine, grinders and necessary jigs and fixtures. Stores and tool room occupies about 350 sq.mtrs. We have sourced machines from top manufacturers to ensure the quality and reliability of our end products.
These Include
- Workshop Facilities
- Project Site Facilities
- Testing and Quality Control Facilities
- Our Factory is spread over an area of 2000 Sq mtrs with a built up covered area of 1500 sq mts.
- Plant and Machinery : Our plant has a well equipped machine shop, fabrication shop with machines of reputed make such as HMT/KIRLOSKAR/BHARAT FRITZ/ADVANI/ESSAB/MEMCO- Rectifier, MIG welding, TIG welding, Plasma cutting, Plate Rolling, 80 T Hydraulic Press, 5T EOT Crane, 2 T EOT, 1 T EOT cranes, etc.
Workshop Facilities
| Name of the the Machinery /Utility | Make | Specifications |
| Bombay 2055 mm Lathe | Mysore Kirloskar | Swing over cross slide : 630 mm |
| Swing over cross gap : 1200 mm | ||
| Centre to centre length : 2000 mm | ||
| Power : 14.5 H.P. | ||
| Enterprise 1330 Lathe | Mysore Kirloskar | Swing over cross slide : 105 mm |
| Centre to centre length : 1000 mm | ||
| Power : 2 H.P. | ||
| Shimogga - 2 Lathe | Mysore Kirloskar | Swing over cross slide : 280 mm |
| Centre to centre length : 1500 mm | ||
| Power : 2 H.P. | ||
| Enterprises 1675 Lathe | Mysore Kirloskar | Swing over cross slide : 200 mm |
| Swing over cross gap : 500 mm | ||
| Centre to centre length : 600 mm | ||
| Power : 7 H.P. | ||
| Parmar Lathe Machine | Atlas | Swing over cross slide : 180 mm |
| Swing in Gap : 500 mm | ||
| Centre to centre length : 1000 mm | ||
| Drill Machine Type RM - 61 | HMT | Drilling cap. : 65 mm in steel, 80mm in C.I. |
| Radial Drill Machine Type PRD | Prakash | Capacity : 38 mm |
| Drill Machine Model P4/38 | EIFCO | Capacity: 32 mm |
| Milling Machine | Bharat Friz Werner Ltd | Bed Size 45 " x 10 " |
| Slotting Machine | EIFCO | Model - ESM/105 |
| Hacksaw Machine Cobra 9 | Kirloskar | Capacity : 18 " |
| Hydraulic Power Press | Oil Gear Towler Polyhydron P.L. | 80 Tons Capacity |
| EOT Crane | Handelwel | Cap: 5 Ton -- 8 mt span, 6 mt height, 30 mt in length |
| EOT Crane | Handelwel | Cap : 2 Ton -- 8 mt span, mt height, 18 mt in length |
| EOT Crane | Handelwel | Cap : 1 Ton -- 12 mt span, mt height, 13 mt in length |
| Chain Pulley Blocks | Indef | Capacity : 1,2,3,5,10 Ton |
| PLASMA Cutting Machine | Warpp | CS, SS, AL -- upto 16 mm |
| Pipe bending machine | YDRO | 4 " max - MS, GI Pipe |
| Air Compressor | ELGI | 12.5 kg/cm2 , 3 HP , 420 Lts |
| Air Compressor | KMT | 5.5 kg/cm2 , 1 HP , 100 Lts |
| Diesel Generator Set | Same Greaves | Capacity : 80 KVA |
| Rolling Machine | Prakash | Capacity : 20 thick x 2500 mm |
| Plate bending machine | Vimex | Capacity : MS 6 thk x 2500 mm SS 3 thk x 2500 mm |
| Plate Shearing machine | Vimex | Capacity : MS 6 thk x 2500 mm SS 3 thk x 2500 mm |
| MIG Welding Machines | Warpp | 3 Phase, 400 Amps |
| Arc Welding Machines | Delta, L & T Zuper, MEMCO MRD, Warpp | 3 Phase, 400 Amps |
| Bench Grinders | Rigman | Wheel Size : 8 " |
| Pug Cutting Machine | ESAB, Konark, Zuper Fine Cut | MS cutting upto 50 mm thickness |
| Gas Cutting Sets | Messer | Consist of Hoses, regulators, cutting torch |
| Angle Grinders | Dewalt, KPT, Black & Decker | Wheel Size : 5 " , 7 " , 14" |
| Chopsaw Machine | Dewalt | Wheel Size : 14 " |
| Portable Drill Machine | KPT | Capacity of drill bit : 3 mm to 16 mm |
Contact Us
Zuari Engineering Services
Address : Plot No 27, Sancoale Industrial Estate , Zuarinagar, Goa - 403802, India
Mobile : +91-9881001231, +91-7030007447
Phone : +91-70-30007446, +91-70-30007440
Fax : +91-8-2555731
